-
逸品
デジタルスケール5つの使用用途と高精度SF-890詳細レビュー
ネットショップではかりを探していた所、この商品の仕様が使用用途にピッタリでした。 しかし、価格が安すすぎて、精度面と耐久性が不安でした。 楽天市場で購入して、簡単に精度確認を行ってみると、5~12g前後の誤差と推察され、たいへん満足できる... -
家の物事
【英式 パンク修理】自転車のパンク修理 手順
自転車でちょっとそこまで買い物に出ようとしたら、タイヤに空気が入っていない・・・。昨日まで入っていたので、「いたずらかな?誰かが意地悪したかな?」とおもいつつ、トップナットの緩みを確認して空気を入れても、すぐにタイヤが柔らかくなる。どう... -
車・バイク
タンクバッグ プラスチックバックル交換
NIFCO、KIFCO、TIFCO プラスチックバックルの交換 セロー250に着けているタンクバッグタナックス(TANAX) オフロードタンクバッグ3 モトフィズ(MOTOFIZZ) ブラック MFK-082(容量4.5ℓ) 転倒の多いオフロード(トレイル)バイクですので、品質の高い外装... -
家の物事
棚をシンプルにDIYした手順
工作好きの書斎を作りたいのだが既製品の棚では気に入った棚がみつからない! クリエーター・ゲーマー・モデラー・工作好きの方に向けて、棚部約2万5千円でシンプルで頑丈なフローティングシェルフをDIYしました。 壁に穴を開けるのがネックで、気に入っ... -
家の物事
【DIY】雇い実で木をキレイにつなぐ
木をつなぐ方法を下に挙げてみたが、結論から言うと、トリマーを持っていてDIY程度であれば、『雇い実(ざね)』が強度があり正確です。 トリマーを持っていない方も、あると作業の幅が増えますので、購入を考えても良いかもしれません。 頻繁に行うのであ... -
家の物事
【DIY】ザグリ穴隠しのやり方
板を壁に固定するために、5×80mmのコーススレッドでとめる時のザグリ穴隠し手順です。 ザグリ穴とは木にビスどめした際、ビスの頭を板面から飛び出さないようにするための穴です。 ザグリ穴隠し用のプラスチックカバーや金属カバーもありますが、この記... -
家の物事
机をシンプルにDIYした手順
既製品のデスクでは窮屈でのびのびとデスクワークできない!このイライラ解消できますか? クリエーター・ゲーマー・モデラー・工作好きの方に向けて、約2万円で書斎兼作業部屋の机をDIYしました。 テレワーク・リモートワークが増えて、小さな机に書類や... -
車・バイク
FFヒーターの取り付け。最適な暖房器具をDIY設置する
Amazonで中国製FFヒーターが、1万円台で販売されているけど、品質は大丈夫かなぁ~、DIYでの取付け大変かなぁ~ 品質は、車中泊会社員生活で1冬目1月~3月、2冬目11月~3月までほぼ毎日使用、現在4冬目ですが異音や異臭なく快調です。取り付けは、ち... -
車・バイク
ジーエスGSメタルシートMS-2の効果とDIY貼り方/丸1年車中泊した会社員の検証
メタル シート ms 2の効果や購入方法、価格がわかれば、がんばってDIYしようかなぁ~ メタル シート ms 2をDIYで貼った手順(購入方法、価格)と1年超車中泊会社員生活を送ってわかった効果をお伝えします。 施工:2019年12月 gsメタルシートの貼り... -
車・バイク
車中泊バンを高制振!レジェトレックスを貼る6つのメリット
制振材レジェトレックスは、あんなに薄くて効果あるの? レジェトレックスを貼る事で、雨の日の車中泊が、快適で、睡眠の質が上がりました。 制振材を貼る前の、雨音が反響し、耳障りだったのが緩和されました。 今回、使用した日東電工レジェトレックスD...